Ritron Q1 Basic Analog Callbox MURS VHF License-Free

Ritron Q1 Basic Analog Callbox MURS VHF License-Free
This product is temporarily unavailable.
Put wireless communication right where you need it! Position the compact and durable Q Series 2-way radio callbox virtually anywhere to maximize manpower efficiency, and improve safety and service response times. Deploys easily – no wires, no trenching, no construction required. Can be used stand-alone using alkaline batteries or can be powered using an external AC adapter. The Q Series callbox provides crisp, clear, long-range voice communication and allows staff and visitors to communicate with your analog radio-equipped personnel from points near and far, be it the plant floor, a maintenance garage, the gated entrance, a delivery dock, or the 9th Tee. Accomplish more with your 2-way radio system!
Includes

Battery Powered or External Power Capable
Rugged, Polycarbonate Gasket-Sealed Enclosure
Vandal-Resistant, Built-In Antenna
Vandal-Resistant, 1,000,000 Cycle, Aluminum PTT Button
D-Cell (3) Battery Tray (batteries not included)
Integrated Speaker & Microphone
Field-Programmable and PC Programmable
Metal Wall-Mount Brackets (2), for flat surface, 4 Screws
T-25 Torx Bit (hollow point type)

Features

Wireless, 2-Way, Push-To-Talk, Narrowband Analog Technology
No trenching or construction costs to install
Available in VHF MURS License-Free frequency band, and license-required VHF 150-165MHz and UHF, 450-470MHz frequency band
Business band frequencies, long-range performance – up to1 mile* *line-of-sight.
Works with any VHF or UHF analog business band 2-way radio
Durable, gasket-sealed, high-impact molded, polycarbonate enclosure
Tamper and Vandal-Resistant, Internal Antenna, Long-Life, Machined Aluminum PTT Button
Battery* Powered For Stand-Alone Operation or External Power for Always-On Operation. *For optimal performance in battery-only applications, Auto Turn-Off should be enabled.
Adjustable Volume, High-Audio Output, Provides Easy To Hear Audio In High Noise Areas
User Adjustable field-programmable settings.
PC programmable
Built-in relay control (Series 7 model only) allows long-range, remote control of gates or doors or use with an optional flashing strobe light.
Standard Flange Mount Hole Pattern Easy Installation. Optional Mounting Brackets Available
Available In Different Enclosure Colors: High-Viz Green and Black
Call Ritron regarding custom colors for volume applications
Designed and Made in the USA

Manufacturer’s Warranty

1 Year

Technical Specifications

Description –Analog, Conventional: VHF MURS

Tx Pwr Using 3 D-Cells: 700mW

TX Pwr Using Ext 12VDC Pwr: 2 Watts

Includes Built-In Relay, Stored-Voice Msg, Sensor Switch Inputs: No
RF Channels: 1 Channel Analog (12.5KHz)
Signaling: CTCSS & DCS Encode/Decode, DTMF Encode/Decode, SelCal Encode/Decode, 2-Tone Decode Only
Dimensions: 7” H x 5” W x 3” D
Weight: 2.75 lbs
Enclosure Material: Gasket Sealed, High-Impact Polycarbonate
Colors: Black or High-Viz Green
Environmental: Splash resistant, shock, and vibration per Ritron test
Operating Temperature: -20°C to +55°C (-4°F to 131°F) Battery rating. At 0°C the capacity is < 50% rated) Talk range will decrease at low temperatures when operating on alkaline batteries.
Programming: Field programming capability of limited parameters. Full programming capability using internal USB Connector used for full PC Programming.
Built-in Remote Control Relay (7 Series): Can be used to remotely control gates, doors, or strobe lights. The (7 Series) relay switch is controlled when the callbox receives the pre-programmed selective signaling command code.
SPDT, 3A, 125VAC/30VDC – Normally Open or Normally Closed (NO Default). Modes of Operation: Momentary or Toggle, On/Off.
Aux Sensor Monitoring Input: Optional sensors used to detect motion, gate movement, vandal/tamper or vehicle presence can be connected to the callbox using the sensor input.
Sensor input responds to an Open or Closed switch. Callbox will send either an alarm tone or a recordable voice message when the optional switch/sensor detects a change.
Can also be programmed to automatically turn the callbox ON and transmits recordable voice message or alarm tone to radios monitoring callbox activity.
Adjustable Speaker Volume: Adjustable 20% to 100%
Automatic Turn-Off Feature: Conserves batteries. Selectable turn-off times will automatically turn the callbox off after a set period of inactivity on the radio channel. Auto Turn-OFF feature must be enabled when using battery-only power.
Listen-In Feature: Callbox can be selectively paged to allow remote monitoring of audio in the vicinity of the callbox.
Busy Channel TX Inhibit: Prevents Callbox from transmitting if someone else is using the radio channel.
Recordable Voice Messages: Greeting Message/Send Call Alert Message/Sensor ON/Sensor OFF/ Low Battery Message/Send Power Fail Message/Auto “Re-Send” – Selectable 0-5 times.
Battery Life: 3 D-Cell Alkaline Batteries: Number of Transmissions: Approximately 6,000 based on a duty cycle of 3 Seconds Receive, 3 Seconds Transmit, 10 Seconds Standby.

Model Numbering Key

M: denotes MURS Frequencies only (Note: For Part 90 licensed VHF frequencies you must order the non-M VHF model)
7: denotes advanced feature model i.e. built-in relay control, recordable voice messages, and 1 dry-contact switch input.
-BLK: denotes housing color is black. (Default color is Hi-Viz Green)

Product Video

Product Literature

Ritron Call Box Brochure